public/Mind-Controlled-Shock-Collar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
Mind-Controlled-Shock-Collar/static/images/inky

1001 lines
34 KiB
Plaintext
Raw Permalink Normal View History

Lots of various updates for Open Sauce
2024-06-19 21:32:41 -07:00
#!/bin/bash
: <<'DISCLAIMER'
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
This script is licensed under the terms of the MIT license.
Unless otherwise noted, code reproduced herein
was written for this script.
- The Pimoroni Crew -
DISCLAIMER
# script control variables
productname="Inky pHAT & wHAT" # the name of the product to install
scriptname="inky" # the name of this script
spacereq=50 # minimum size required on root partition in MB
debugmode="no" # whether the script should use debug routines
debuguser="none" # optional test git user to use in debug mode
debugpoint="none" # optional git repo branch or tag to checkout
forcesudo="no" # whether the script requires to be ran with root privileges
promptreboot="no" # whether the script should always prompt user to reboot
mininstall="no" # whether the script enforces minimum install routine
customcmd="yes" # whether to execute commands specified before exit
gpioreq="yes" # whether low-level gpio access is required
i2creq="yes" # whether the i2c interface is required
i2sreq="no" # whether the i2s interface is required
spireq="yes" # whether the spi interface is required
uartreq="no" # whether uart communication is required
armhfonly="yes" # whether the script is allowed to run on other arch
armv6="yes" # whether armv6 processors are supported
armv7="yes" # whether armv7 processors are supported
armv8="yes" # whether armv8 processors are supported
raspbianonly="no" # whether the script is allowed to run on other OSes
osreleases=( "Raspbian" ) # list os-releases supported
oswarning=( "Debian" "Kano" "PiTop" "RetroPie" ) # list experimental os-releases
osdeny=( "Darwin" "Kali" "Linaro" "Mate" "Ubuntu" "Volumio" ) # list os-releases specifically disallowed
debpackage="inky" # the name of the package in apt repo
piplibname="inky" # the name of the lib in pip repo
pipoverride="yes" # whether the script should give priority to pip repo
pip2support="no" # whether python2 is supported
pip3support="yes" # whether python3 is supported
topdir="Pimoroni" # the name of the top level directory
localdir="inky" # the name of the dir for copy of resources
gitreponame="inky" # the name of the git project repo
gitusername="pimoroni" # the name of the git user to fetch repo from
gitrepobranch="master" # repo branch to checkout
gitrepotop="root" # the name of the dir to base repo from
gitrepoclone="no" # whether the git repo is to be cloned locally
gitclonedir="source" # the name of the local dir for repo
repoclean="no" # whether any git repo clone found should be cleaned up
repoinstall="no" # whether the library should be installed from repo
libdir="library" # subdirectory of library in repo
copydir=( "examples" ) # subdirectories to copy from repo
copyhead="no" # whether to use the latest repo commit or release tag
pkgremove=() # list of conflicting packages to remove
coredeplist=() # list of core dependencies
pythondep=( "numpy" "pil" "lxml" "smbus" ) # list of python dependencies
pipdeplist=() # list of dependencies to source from pypi
examplesdep=( "geocoder" "beautifulsoup4" "qrcode" "icalendar" "fonts" "font_hanken_grotesk" "font_intuitive" "font_fredoka_one" "font_source_serif_pro" "font_source_sans_pro" "wikiquotes" ) # list of python modules required by examples
somemoredep=() # list of additional dependencies
xdisplaydep=() # list of dependencies requiring X server
# template 1712181300
FORCE=$1
ASK_TO_REBOOT=false
CURRENT_SETTING=false
MIN_INSTALL=false
FAILED_PKG=false
REMOVE_PKG=false
UPDATE_DB=false
AUTOSTART=~/.config/lxsession/LXDE-pi/autostart
BOOTCMD=/boot/cmdline.txt
CONFIG=/boot/config.txt
DTBODIR=/boot/overlays
APTSRC=/etc/apt/sources.list
INITABCONF=/etc/inittab
BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf
LOADMOD=/etc/modules
RASPOOL="http://mirrordirector.raspbian.org/raspbian/pool"
RPIPOOL="http://archive.raspberrypi.org/debian/pool"
DEBPOOL="http://ftp.debian.org/debian/pool"
GETPOOL="https://get.pimoroni.com"
SMBUS2="python-smbus_3.1.1+svn-2_armhf.deb"
SMBUS3="python3-smbus_3.1.1+svn-2_armhf.deb"
SMBUS35="python3-smbus1_1.1+35dbg-1_armhf.deb"
SPIDEV2="python-spidev_2.0~git20150907_armhf.deb"
SPIDEV3="python3-spidev_2.0~git20150907_armhf.deb"
RPIGPIO1="raspi-gpio_0.20170105_armhf.deb"
RPIGPIO2="python-rpi.gpio_0.6.3~jessie-1_armhf.deb"
RPIGPIO3="python3-rpi.gpio_0.6.3~jessie-1_armhf.deb"
export PIP_FORMAT=columns
# function define
confirm() {
if [ "$FORCE" == '-y' ]; then
true
else
read -r -p "$1 [y/N] " response < /dev/tty
if [[ $response =~ ^(yes|y|Y)$ ]]; then
true
else
false
fi
fi
}
prompt() {
read -r -p "$1 [y/N] " response < /dev/tty
if [[ $response =~ ^(yes|y|Y)$ ]]; then
true
else
false
fi
}
success() {
echo -e "$(tput setaf 2)$1$(tput sgr0)"
}
inform() {
echo -e "$(tput setaf 6)$1$(tput sgr0)"
}
warning() {
echo -e "$(tput setaf 1)$1$(tput sgr0)"
}
newline() {
echo ""
}
progress() {
count=0
until [ $count -eq 7 ]; do
echo -n "..." && sleep 1
((count++))
done;
if ps -C $1 > /dev/null; then
echo -en "\r\e[K" && progress $1
fi
}
sudocheck() {
if [ $(id -u) -ne 0 ]; then
echo -e "Install must be run as root. Try 'sudo ./$scriptname'\n"
exit 1
fi
}
sysclean() {
sudo apt-get clean && sudo apt-get autoclean
sudo apt-get -y autoremove &> /dev/null
}
sysupdate() {
if ! $UPDATE_DB; then
echo "Updating apt indexes..." && progress apt-get &
sudo apt-get update 1> /dev/null || { warning "Apt failed to update indexes!" && exit 1; }
sleep 3 && UPDATE_DB=true
fi
}
sysupgrade() {
sudo apt-get upgrade
sudo apt-get clean && sudo apt-get autoclean
sudo apt-get -y autoremove &> /dev/null
}
sysreboot() {
warning "Some changes made to your system require"
warning "your computer to reboot to take effect."
echo
if prompt "Would you like to reboot now?"; then
sync && sudo reboot
fi
}
home_dir() {
if [ $EUID -ne 0 ]; then
USER_HOME=$(getent passwd $USER | cut -d: -f6)
else
warning "Running as root, please log in as a regular user with sudo rights!"
echo && exit 1
fi
}
space_chk() {
if command -v stat > /dev/null; then
if [ $spacereq -gt $(($(stat -f -c "%a*%S" /)/10**6)) ];then
echo
warning "There is not enough space left to proceed with installation"
if confirm "Would you like to attempt to expand your filesystem?"; then
curl -sS $GETPOOL/expandfs | sudo bash && exit 1
else
echo && exit 1
fi
fi
fi
}
timestamp() {
date +%Y%m%d-%H%M
}
check_network() {
sudo ping -q -w 10 -c 1 1.1.1.1 | grep "received, 0" &> /dev/null
if [ $? -eq 0 ]; then
return 0
else
sudo ping -q -w 10 -c 1 8.8.8.8 | grep "received, 0" &> /dev/null
if [ $? -eq 0 ]; then
return 0
fi
fi
return 1
}
launch_url() {
check_network || (error_box "You don't appear to be connected to the internet, please check your connection and try again!" && exit 1)
if command -v xdg-open > /dev/null; then
xdg-open "$1" && return 0
else
error_box "There was an error attempting to launch your browser!"
fi
}
get_install() {
check_network || (error_box "You don't appear to be connected to the internet, please check your connection and try again!" && exit 1)
if [ "$1" != diagnostic ];then
sysupdate && UPDATE_DB=true
fi
if ! command -v curl > /dev/null; then
apt_pkg_install "curl"
fi
curl -sS https://get.pimoroni.com/$1 | bash -s - "-y" $2
read -p "Press Enter to continue..." < /dev/tty
}
apt_pkg_req() {
APT_CHK=$(dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "install ok installed")
if [ "" == "$APT_CHK" ]; then
echo "$1 is required"
true
else
echo "$1 is already installed"
false
fi
}
apt_pkg_install() {
echo "Installing $1..."
sudo apt-get --yes install "$1" 1> /dev/null || { inform "Apt failed to install $1!\nFalling back on pypi..." && return 1; }
}
apt_deb_chk() {
BEFORE=$(dpkg-query -W "$1" 2> /dev/null)
sudo apt-get --yes install "$1" &> /dev/null || return 1
AFTER=$(dpkg-query -W "$1" 2> /dev/null)
if [ "$BEFORE" == "$AFTER" ]; then
echo "$1 is already the newest version"
else
echo "$1 was successfully upgraded"
fi
}
apt_deb_install() {
echo "Installing $1..."
if [[ "$1" != *".deb"* ]]; then
sudo apt-get --yes install "$1" &> /dev/null || inform "Apt failed to install $1!\nFalling back on pypi..."
dpkg-query -W -f='${Status}\n' "$1" 2> /dev/null | grep "install ok installed"
else
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX`
cd $DEBDIR
wget "$GETPOOL/resources/$1" &> /dev/null
sudo dpkg -i "$DEBDIR/$1" | grep "Installing $1"
fi
}
pip_cmd_chk() {
if command -v pip2 > /dev/null; then
PIP2_BIN="pip2"
elif command -v pip-2.7 > /dev/null; then
PIP2_BIN="pip-2.7"
elif command -v pip-2.6 > /dev/null; then
PIP2_BIN="pip-2.6"
else
PIP2_BIN="pip"
fi
if command -v pip3 > /dev/null; then
PIP3_BIN="pip3"
elif command -v pip-3.3 > /dev/null; then
PIP3_BIN="pip-3.3"
elif command -v pip-3.2 > /dev/null; then
PIP3_BIN="pip-3.2"
fi
}
pip2_lib_req() {
PIP2_CHK=$($PIP2_BIN list 2> /dev/null | grep -i "$1")
if [ -z "$PIP2_CHK" ]; then
true
else
false
fi
}
pip3_lib_req() {
PIP3_CHK=$($PIP3_BIN list 2> /dev/null | grep -i "$1")
if [ -z "$PIP3_CHK" ]; then
true
else
false
fi
}
usb_max_power() {
if grep -q "^max_usb_current=1$" $CONFIG; then
echo -e "\nMax USB current setting already active"
else
echo -e "\nAdjusting USB current setting in $CONFIG"
echo "max_usb_current=1" | sudo tee -a $CONFIG &> /dev/null
fi
}
add_dtoverlay() {
if grep -q "^dtoverlay=$1" $CONFIG; then
echo -e "\n$1 overlay already active"
elif grep -q "^#dtoverlay=$1" $CONFIG; then
sudo sed -i "/^#dtoverlay=$1$/ s|#||" $CONFIG
echo -e "\nAdding $1 overlay to $CONFIG"
ASK_TO_REBOOT=true
else
echo "dtoverlay=$1" | sudo tee -a $CONFIG &> /dev/null
echo -e "\nAdding $1 overlay to $CONFIG"
ASK_TO_REBOOT=true
fi
}
remove_dtoverlay() {
sudo sed -i "/^dtoverlay=$1$/ s|^|#|" $CONFIG
ASK_TO_REBOOT=true
}
enable_pi_audio() {
if grep -q "#dtparam=audio=on" $CONFIG; then
sudo sed -i "/^#dtparam=audio=on$/ s|#||" $CONFIG
echo -e "\nsnd_bcm2835 loaded (on-board audio enabled)"
ASK_TO_REBOOT=true
fi
}
disable_pi_audio() {
if grep -q "^dtparam=audio=on" $CONFIG; then
sudo sed -i "/^dtparam=audio=on$/ s|^|#|" $CONFIG
echo -e "\nsnd_bcm2835 unloaded (on-board audio disabled)"
ASK_TO_REBOOT=true
fi
}
test_audio() {
echo
if confirm "Do you wish to test your system now?"; then
echo -e "\nTesting..."
speaker-test -l5 -c2 -t wav
fi
}
disable_pulseaudio() {
sudo mv /etc/xdg/autostart/pulseaudio.desktop /etc/xdg/autostart/pulseaudio.disabled &> /dev/null
pulseaudio -k &> /dev/null
}
kill_volumealsa() {
sed -i "s|type=volumealsa|type=space|" $HOME/.config/lxpanel/LXDE/panels/panel &> /dev/null
sed -i "s|type=volumealsa|type=space|" $HOME/.config/lxpanel/LXDE-pi/panels/panel &> /dev/null
}
basic_asound() {
sudo echo -e "pcm.\041default {\n type hw\n card 1\n}" > $HOME/.asoundrc
sudo echo -e "ctl.\041default {\n type hw\n card 1\n}" >> $HOME/.asoundrc
sudo mv $HOME/.asoundrc /etc/asound.conf
}
config_set() {
if [ -n $defaultconf ]; then
sudo sed -i "s|$1=.*$|$1=$2|" $defaultconf
else
sudo sed -i "s|$1=.*$|$1=$2|" $3
fi
}
servd_trig() {
if command -v service > /dev/null; then
sudo service $1 $2
fi
}
get_init_sys() {
if command -v systemctl > /dev/null && systemctl | grep -q '\-\.mount'; then
SYSTEMD=1
elif [ -f /etc/init.d/cron ] && [ ! -h /etc/init.d/cron ]; then
SYSTEMD=0
else
echo "Unrecognised init system" && exit 1
fi
}
i2c_vc_dtparam() {
if [ -e $CONFIG ] && grep -q "^dtparam=i2c_vc=on$" $CONFIG; then
echo -e "\ni2c0 bus already active"
else
echo -e "\nEnabling i2c0 bus in $CONFIG"
echo "dtparam=i2c_vc=on" | sudo tee -a $CONFIG && echo
fi
}
: <<'MAINSTART'
Perform all variables declarations as well as function definition
above this section for clarity, thanks!
MAINSTART
# intro message
if [ $debugmode != "no" ]; then
if [ $debuguser != "none" ]; then
gitusername="$debuguser"
fi
if [ $debugpoint != "none" ]; then
gitrepobranch="$debugpoint"
fi
inform "\nDEBUG MODE ENABLED"
echo -e "git user $gitusername and $gitrepobranch branch/tag will be used\n"
else
echo -e "\nThis script will install everything needed to use\n$productname"
if [ "$FORCE" != '-y' ]; then
inform "\nAlways be careful when running scripts and commands copied"
inform "from the internet. Ensure they are from a trusted source.\n"
warning "This script should -- only be run on a Raspberry Pi with RPi OS --"
warning "other systems and SBCs are not supported and may explode!\n"
echo -e "If you want to see what this script does before running it,"
echo -e "you should run: 'curl $GETPOOL/$scriptname'\n"
fi
fi
# checks and init
space_chk
home_dir
if [ $debugmode != "no" ]; then
echo "USER_HOME is $USER_HOME"
echo "OS_NAME is $OS_NAME"
echo
fi
if [ $forcesudo == "yes" ]; then
sudocheck
fi
if [ $uartreq == "yes" ]; then
echo "Note: $productname requires UART communication"
warning "The serial console will be disabled if you proceed!"
fi
if [ $spireq == "yes" ]; then
echo -e "Note: $productname requires SPI communication"
fi
if [ $i2creq == "yes" ]; then
echo -e "Note: $productname requires I2C communication"
fi
if [ $i2sreq == "yes" ]; then
echo -e "Note: $productname uses the I2S interface"
if [ $OS_NAME != "Volumio" ]; then
warning "The on-board audio chip will be disabled if you proceed!"
fi
fi
newline
if confirm "Do you wish to continue?"; then
# basic environment preparation
echo -e "\nChecking environment..."
if [ "$FORCE" != '-y' ]; then
if ! check_network; then
warning "We can't connect to the Internet, check your network!" && exit 1
fi
sysupdate && newline
fi
if apt_pkg_req "apt-utils" &> /dev/null; then
apt_pkg_install "apt-utils"
fi
if ! command -v curl > /dev/null; then
apt_pkg_install "curl"
fi
if ! command -v wget > /dev/null; then
apt_pkg_install "wget"
fi
if [ "$pip2support" == "yes" ]; then
if ! [ -f "$(which python2)" ]; then
if confirm "Python 2 is not installed. Would like to install it?"; then
progress apt-get &
apt_pkg_install "python-pip"
else
pip2support="na"
fi
elif apt_pkg_req "python-pip" &> /dev/null; then
progress apt-get &
apt_pkg_install "python-pip"
fi
fi
if [ "$pip3support" == "yes" ]; then
if ! [ -f "$(which python3)" ]; then
if prompt "Python 3 is not installed. Would like to install it?"; then
progress apt-get &
apt_pkg_install "python3-pip"
else
pip3support="na"
fi
elif apt_pkg_req "python3-pip" &> /dev/null; then
progress apt-get &
apt_pkg_install "python3-pip"
fi
fi
pip_cmd_chk
# hardware setup
echo -e "\nChecking hardware requirements..."
if [ $uartreq == "yes" ]; then
echo -e "\nThe serial console must be disabled for $productname to work"
curl -sS $GETPOOL/uarton | sudo bash -s - "-y" && ASK_TO_REBOOT=true
fi
if [ $gpioreq == "yes" ]; then
echo -e "\nChecking for packages required for GPIO control..."
if apt_pkg_req "raspi-gpio"; then
if ! apt_pkg_install "raspi-gpio" &> /dev/null; then
echo "package raspi-gpio can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/r/raspi-gpio/$RPIGPIO1 &> /dev/null
sudo dpkg -i $DEBDIR/$RPIGPIO1 && FAILED_PKG=false
fi
fi
if [ "$pip2support" == "yes" ] && ! apt_pkg_install "python-rpi.gpio" &> /dev/null; then
if [ -n $(python --version 2>&1 | grep -q "2.7") ]; then
echo "package python-rpi.gpio can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/r/rpi.gpio/$RPIGPIO2 &> /dev/null
sudo dpkg -i $DEBDIR/$RPIGPIO2 && FAILED_PKG=false
else
sudo $PIP2_BIN install RPi.GPIO && FAILED_PKG=false
fi
fi
if [ "$pip3support" == "yes" ] && ! apt_pkg_install "python3-rpi.gpio" &> /dev/null; then
if [ -n $(python3 --version 2>&1 | grep -q "3.4") ]; then
echo "package python3-rpi.gpio can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/r/rpi.gpio/$RPIGPIO3 &> /dev/null
sudo dpkg -i $DEBDIR/$RPIGPIO3 && FAILED_PKG=false
else
sudo $PIP3_BIN install RPi.GPIO && FAILED_PKG=false
fi
fi
if [ "$pip2support" == "yes" ] && [ -f "$(which python2)" ]; then
if ! $PIP2_BIN list | grep "RPi.GPIO" &> /dev/null; then
warning "Unable to install RPi.GPIO for python 2!" && FAILED_PKG=true
else
RPIGPIO2="install ok installed"
fi
fi
if [ "$pip3support" == "yes" ] && [ -f "$(which python3)" ]; then
if ! $PIP3_BIN list | grep "RPi.GPIO" &> /dev/null; then
warning "Unable to install RPi.GPIO for python 3!" && FAILED_PKG=true
else
RPIGPIO3="install ok installed"
fi
fi
if [ "$RPIGPIO2" == "install ok installed" ] || [ "$RPIGPIO3" == "install ok installed" ]; then
if ! $FAILED_PKG; then
echo -e "RPi.GPIO installed and up-to-date"
fi
fi
fi
if [ $spireq == "yes" ]; then
newline
if ls /dev/spi* &> /dev/null; then
inform "SPI already enabled"
else
echo "SPI must be enabled for $productname to work"
if command -v raspi-config > /dev/null && sudo raspi-config nonint get_spi | grep -q "1"; then
sudo raspi-config nonint do_spi 0
inform "SPI is now enabled"
else
curl -sS $GETPOOL/spi | sudo bash -s - "-y" && ASK_TO_REBOOT=true
fi
fi
echo -e "\nChecking packages required by SPI interface..."
if [ "$pip2support" == "yes" ] && ! apt_pkg_install "python-spidev" &> /dev/null; then
if [ -n $(python --version 2>&1 | grep -q "2.7") ]; then
echo "package python-spidev can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/s/spidev/$SPIDEV2 &> /dev/null
sudo dpkg -i $DEBDIR/$SPIDEV2 && FAILED_PKG=false
else
sudo $PIP2_BIN install spidev && FAILED_PKG=false
fi
fi
if [ "$pip3support" == "yes" ] && ! apt_pkg_install "python3-spidev" &> /dev/null; then
if [ -n $(python3 --version 2>&1 | grep -q "3.4") ]; then
echo "package python3-spidev can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/s/spidev/$SPIDEV3 &> /dev/null
sudo dpkg -i $DEBDIR/$SPIDEV3 && FAILED_PKG=false
else
sudo $PIP3_BIN install spidev && FAILED_PKG=false
fi
fi
if [ "$pip2support" == "yes" ] && [ -f "$(which python2)" ]; then
if ! $PIP2_BIN list | grep "spidev" &> /dev/null; then
warning "Unable to install spidev for python 2!" && FAILED_PKG=true
else
SPIDEV2="install ok installed"
fi
fi
if [ "$pip3support" == "yes" ] && [ -f "$(which python3)" ]; then
if ! $PIP3_BIN list | grep "spidev" &> /dev/null; then
warning "Unable to install spidev for python 3!" && FAILED_PKG=true
else
SPIDEV3="install ok installed"
fi
fi
if [ "$SPIDEV2" == "install ok installed" ] || [ "$SPIDEV3" == "install ok installed" ]; then
if ! $FAILED_PKG; then
echo -e "spidev installed and up-to-date"
fi
fi
fi
if [ $i2creq == "yes" ]; then
newline
if ls /dev/i2c* &> /dev/null; then
inform "I2C already enabled"
else
echo "I2C must be enabled for $productname to work"
if command -v raspi-config > /dev/null && sudo raspi-config nonint get_i2c | grep -q "1"; then
sudo raspi-config nonint do_i2c 0
inform "I2C is now enabled"
else
curl -sS $GETPOOL/i2c | sudo bash -s - "-y" && ASK_TO_REBOOT=true
fi
fi
echo -e "\nChecking packages required by I2C interface..."
if [ "$pip2support" == "yes" ] && ! apt_pkg_install "python-smbus" &> /dev/null; then
FAILED_PKG=false
if [ -n $(python --version 2>&1 | grep -q "2.7") ]; then
echo "package python-smbus can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/i/i2c-tools/$SMBUS2 &> /dev/null
sudo dpkg -i $DEBDIR/$SMBUS2 || FAILED_PKG=true
fi
if $FAILED_PKG; then
warning "Unable to install smbus for python 2!"
else
echo -e "Python 2 smbus installed and up-to-date"
fi
else
echo -e "Python 2 smbus installed and up-to-date"
fi
if [ "$pip3support" == "yes" ] && ! apt_pkg_install "python3-smbus" &> /dev/null; then
FAILED_PKG=false
if [ -n $(python3 --version 2>&1 | grep -q "3.4") ]; then
echo "package python3-smbus can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $RPIPOOL/main/i/i2c-tools/$SMBUS3 &> /dev/null
sudo dpkg -i $DEBDIR/$SMBUS3 || FAILED_PKG=true
elif [ -n $(python3 --version 2>&1 | grep -q "3.5") ]; then
if apt_pkg_req "python3-smbus1" &> /dev/null; then
echo "package python3-smbus can't be found, fetching from alternative location..."
DEBDIR=`mktemp -d /tmp/pimoroni.XXXXXX` && cd $DEBDIR
wget $GETPOOL/resources/$SMBUS35 &> /dev/null
sudo dpkg -i $DEBDIR/$SMBUS35 || FAILED_PKG=true
fi
fi
if $FAILED_PKG; then
warning "Unable to install smbus for python 3!"
else
echo -e "Python 3 smbus installed and up-to-date"
fi
else
echo -e "Python 3 smbus installed and up-to-date"
fi
fi
if [ $i2sreq == "yes" ]; then
if [ -f /etc/asound.conf ]; then
sudo rm -f /etc/asound.conf.backup &> /dev/null
sudo mv /etc/asound.conf /etc/asound.conf.backup
inform "existing config backed up to /etc/asound.conf.backup"
fi
if [ -f $HOME/.asoundrc ]; then
sudo rm -f $HOME/.asoundrc.backup &> /dev/null
sudo mv $HOME/.asoundrc $HOME/.asoundrc.backup
inform "existing config backed up to ~/.asound.conf.backup"
fi
fi
# minimum install routine
if [ $mininstall != "yes" ] && [ $gitrepoclone != "yes" ]; then
newline
echo "$productname comes with examples and documentation that you may wish to install."
echo "Performing a full install will ensure those resources are installed,"
echo "along with all required dependencies. It may however take a while!"
newline
if ! confirm "Do you wish to perform a full install?"; then
MIN_INSTALL=true
fi
else
MIN_INSTALL=true
fi
if [ $localdir != "na" ]; then
installdir="$USER_HOME/$topdir/$localdir"
else
installdir="$USER_HOME/$topdir"
fi
if ! $MIN_INSTALL || [ $gitrepoclone == "yes" ]; then
[ -d $installdir ] || mkdir -p $installdir
fi
if [ $debugmode != "no" ]; then
echo "INSTALLDIR is $installdir"
fi
# apt repo install
echo -e "\nChecking for dependencies..."
if $REMOVE_PKG; then
for pkgrm in ${pkgremove[@]}; do
warning "Installed package conflicts with requirements"
sudo apt-get remove "$pkgrm"
done
fi
for pkgdep in ${coredeplist[@]}; do
if apt_pkg_req "$pkgdep"; then
apt_pkg_install "$pkgdep"
fi
done
for pkgdep in ${pythondep[@]}; do
if [ -f "$(which python2)" ] && [ $pip2support == "yes" ]; then
if apt_pkg_req "python-$pkgdep"; then
apt_pkg_install "python-$pkgdep"
fi
fi
if [ -f "$(which python3)" ] && [ $pip3support == "yes" ]; then
if apt_pkg_req "python3-$pkgdep"; then
apt_pkg_install "python3-$pkgdep"
fi
fi
done
if [ $pipoverride != "yes" ] && [ $debpackage != "na" ]; then
newline
if [ $pip2support != "yes" ] && [ $pip3support != "yes" ]; then
apt_deb_install "$debpackage"
fi
if [ -f "$(which python2)" ] && [ $pip2support == "yes" ]; then
apt_deb_install "python-$debpackage"
if ! apt_pkg_req "python-$debpackage" &> /dev/null; then
sudo $PIP2_BIN uninstall -y "$piplibname" &> /dev/null
fi
fi
if [ -f "$(which python3)" ] && [ $pip3support == "yes" ]; then
apt_deb_install "python3-$debpackage"
if ! apt_pkg_req "python3-$debpackage" &> /dev/null; then
sudo $PIP3_BIN uninstall -y "$piplibname" &> /dev/null
fi
fi
if apt_pkg_req "python-$debpackage" &> /dev/null || apt_pkg_req "python3-$debpackage" &> /dev/null; then
debpackage="na"
fi
else
debpackage="na"
fi
# pypi repo install
if [ -f "$(which python2)" ] && [ $pip2support == "yes" ] && apt_pkg_req "python-$debpackage" &> /dev/null; then
if [ $piplibname != "na" ] && [ $debpackage == "na" ]; then
newline && echo "Installing $productname library for Python 2..." && newline
if ! sudo -H $PIP2_BIN install --upgrade "$piplibname"; then
warning "Python 2 library install failed!"
echo "If problems persist, visit forums.pimoroni.com for support"
exit 1
fi
fi
fi
if [ -f "$(which python3)" ] && [ $pip3support == "yes" ] && apt_pkg_req "python3-$debpackage" &> /dev/null; then
if [ $piplibname != "na" ] && [ $debpackage == "na" ]; then
newline && echo "Installing $productname library for Python 3..." && newline
if ! sudo -H $PIP3_BIN install --upgrade "$piplibname"; then
warning "Python 3 library install failed!"
echo "If problems persist, visit forums.pimoroni.com for support"
exit 1
fi
fi
fi
# git repo install
if [ $gitrepoclone == "yes" ]; then
if ! command -v git > /dev/null; then
apt_pkg_install git
fi
if [ $gitclonedir == "source" ]; then
gitclonedir=$gitreponame
fi
if [ $repoclean == "yes" ]; then
rm -Rf $installdir/$gitclonedir
fi
if [ -d $installdir/$gitclonedir ]; then
newline && echo "Github repo already present. Updating..."
cd $installdir/$gitclonedir && git pull
else
newline && echo "Cloning Github repo locally..."
cd $installdir
if [ $debugmode != "no" ]; then
echo "git user name is $gitusername"
echo "git repo name is $gitreponame"
fi
if [ $gitrepobranch != "master" ]; then
git clone https://github.com/$gitusername/$gitreponame $gitclonedir -b $gitrepobranch
else
git clone --depth=1 https://github.com/$gitusername/$gitreponame $gitclonedir
fi
fi
fi
if [ $repoinstall == "yes" ]; then
newline && echo "Installing library..." && newline
cd $installdir/$gitreponame/$libdir
if [ -f "$(which python2)" ] && [ $pip2support == "yes" ]; then
sudo python2 ./setup.py install
fi
if [ -f "$(which python3)" ] && [ $pip3support == "yes" ]; then
sudo python3 ./setup.py install
fi
newline
fi
# additional install
if ! $MIN_INSTALL; then
echo -e "\nChecking for additional software..."
for moredep in ${examplesdep[@]}; do
if [ -f "$(which python2)" ] && apt_pkg_req "python-$moredep"; then
if ! apt_pkg_install "python-$moredep"; then
sudo -H $PIP2_BIN install "$moredep"
if pip2_lib_req "$moredep"; then
FAILED_PKG=true
fi
fi
fi
if [ -f "$(which python3)" ] && apt_pkg_req "python3-$moredep"; then
if ! apt_pkg_install "python3-$moredep"; then
sudo -H $PIP3_BIN install "$moredep"
if pip3_lib_req "$moredep"; then
FAILED_PKG=true
fi
fi
fi
done
for pipdep in ${pipdeplist[@]}; do
if [ -f "$(which python2)" ] && pip2_lib_req "$pipdep"; then
sudo -H $PIP2_BIN install "$pipdep"
fi
if [ -f "$(which python3)" ] && pip3_lib_req "$pipdep"; then
sudo -H $PIP3_BIN install "$pipdep"
fi
done
for moredep in ${somemoredep[@]}; do
if apt_pkg_req "$moredep"; then
apt_pkg_install "$moredep"
fi
done
if [ -n "$DISPLAY" ]; then
for x11dep in ${xdisplaydep[@]}; do
if apt_pkg_req "$x11dep"; then
apt_pkg_install "$x11dep"
fi
done
fi
fi
# resources install
if ! $MIN_INSTALL && [ -n "$copydir" ]; then
if ! command -v git > /dev/null; then
apt_pkg_install git
fi
echo -e "\nDownloading examples and documentation..."
TMPDIR=`mktemp -d /tmp/pimoroni.XXXXXX`
cd $TMPDIR
if [ $copyhead != "yes" ]; then
GITTAG=$(git ls-remote -t https://github.com/$gitusername/$gitreponame v\?.?.? | tail -n 1 | rev | cut -c -6 | rev)
fi
if [ -n "$GITTAG" ]; then
git clone https://github.com/$gitusername/$gitreponame -b $GITTAG &> /dev/null
else
git clone --depth=1 https://github.com/$gitusername/$gitreponame &> /dev/null
fi
cd $installdir
for repodir in ${copydir[@]}; do
if [ -d $repodir ] && [ $repodir != "documentation" ]; then
newline
if [ -d $installdir/$repodir-backup ]; then
rm -R $installdir/$repodir-old &> /dev/null
mv $installdir/$repodir-backup $installdir/$repodir-old &> /dev/null
fi
mv $installdir/$repodir $installdir/$repodir-backup &> /dev/null
if [ $gitrepotop != "root" ]; then
cp -R $TMPDIR/$gitreponame/$gitrepotop/$repodir $installdir/$repodir &> /dev/null
else
cp -R $TMPDIR/$gitreponame/$repodir $installdir/$repodir &> /dev/null
fi
inform "The $repodir directory already exists on your system!"
echo -e "We've backed them up as $repodir-backup, just in case you've changed anything!\n"
else
rm -R $installdir/$repodir &> /dev/null
if [ $gitrepotop != "root" ]; then
cp -R $TMPDIR/$gitreponame/$gitrepotop/$repodir $installdir/$repodir &> /dev/null
else
cp -R $TMPDIR/$gitreponame/$repodir $installdir/$repodir &> /dev/null
fi
fi
done
echo "Resources for your $productname were copied to"
inform "$installdir"
rm -rf $TMPDIR
fi
# script custom routines
if [ $customcmd == "no" ]; then
if [ -n "$pkgremove" ]; then
echo -e "\nFinalising Install...\n"
sysclean && newline
fi
echo -e "\nAll done. Enjoy your $productname!\n"
else # custom block starts here
echo -e "\nFinalising Install...\n"
# place all custom commands in this scope
fi
if $FAILED_PKG; then
warning "\nSome packages could not be installed, review the output for details!\n"
fi
if [ "$FORCE" != '-y' ]; then
if [ $promptreboot == "yes" ] || $ASK_TO_REBOOT; then
sysreboot && newline
fi
fi
else
echo -e "\nAborting...\n"
fi
exit 0
Reference in New Issue Copy Permalink